Browse by products

Browse by products

EXHC000GEx-proof housing for thermal cameras

MARKETS

CERTIFICATIONS

DESCRIPTION

The EXHC000G housing is made with strong anticorodal aluminium die-cast alloy of the AISi 7Mg EN - AB 42000 group.

The germanium viewing window is designed for thermal imaging camera installations. Its composition with the remarkable properties covers transmission from 7.5 to 14μm IR range with the best optical quality. All external components are stove enamelled.

KEY FEATURES

Designed to meet the strictest international standards and to operate in hazardous areas

Effective monitoring even in complete darkness or in extreme environmental conditions, fog, rain or smoke

Solid, non corrosive die-cast aluminium construction

TECHNICAL DATA

General
  • Non-corrosive die-cast aluminium (anticorodal)
  • Epoxy powder painted with orange peel effect, RAL7032
Mechanical
  • 2 inputs 3/4” NPT for cable glands
  • External dimensions:ᅠ ᅠ210x427.5mm (8.3x16.8in)
  • Internal dimensions:ᅠ ᅠ180x380mm (7.1x15in)
  • Internal usable area:ᅠ ᅠ100x100x280mm (3.9x3.9x11in)
  • Unit weight:ᅠ ᅠ15kg (33.5lb)
Housing's window
  • Germanium window
  • Usable diameter:ᅠ ᅠ114mm (4.5in)
  • Thick:12mm (0.47in)
  • External treatment:ᅠ ᅠscratch resistantᅠ ᅠ(Hard Carbon Coating - DLC)
  • Internal treatment:ᅠ ᅠnon-reflective
  • Spectral range:ᅠ ᅠfromᅠ ᅠ7.5μmᅠ ᅠup toᅠ ᅠ14μm
Electrical
  • Power supply IN 24Vac, 50/60Hz
  • Heater Ton 10°C±4°C (50°F±7°F) Toff 25°C±3°C (77°F±5°F)
  • INᅠ ᅠ24Vac,ᅠ ᅠpower consumptionᅠ ᅠ20Wᅠ ᅠmax
  • Devices to install inside the housing:
  • Camera equipped with lens with max total power of 20W
  • Voltageᅠ ᅠ24Vacᅠ ᅠmax
  • Useful volume for camera / lens: 2800cm ³
  • Minimum distance between the walls of the housing and the camera/lens: 12mm
Environment
  • For installation indoors and outdoors
  • Operating temperature with heating:ᅠ ᅠfromᅠ ᅠ-20°C (-4°F)ᅠ ᅠup to+50°C (122°F)
  • Always refer to the temperature in the marking.
Certifications
  • ATEX (EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009):
  • Exᅠ ᅠII 2G Ex d IIC T6 Gb

    Exᅠ ᅠII 2D Ex t IIIC T85 °C Db IP66

    ᅠ ᅠ0044: notify number from competent body

  • EAC EX:
  • Ex II 2G Ex d IIC T6 Gb,-20°C/+50°C

    EX II 2D Ex t IIIC T85°C Db -20°C/+50°C, IP66

Accessories
  • OEXPLUG3/4 Plug EX 3/4" NPT IECEX-ATEX-EAC Ex
  • OCTEXP3/4C Conduit cable gland nickel-plated brass 3/4" NPT IECEX-ATEX-EAC Ex
  • OCTEX1/2-3/4C Cable glands reduction in nickel-plated brass 3/4" - 1/2" NPT IECEX-ATEX-EAC Ex
  • OCTEXS1/2C Cable gland in nickel-plated brass EX 1/2" NPT, unarmoured cable IECEX-ATEX-EAC Ex , ᅠ with gasket from 7.5 to 11.9mm (3 to 4.7in)
  • OCTEX1/2C Cable gland in nickel-plated brass EX 1/2" NPT, unarmoured cable IECEX-ATEX-EAC Ex , ᅠ with gasket from 3 to 8mm (0.12 to 0.31in)
  • OCTEXB1/2C Barrier cable gland in nickel-plated brass EX 1/2" NPT, unarmoured cable IECEX-ATEX-EAC Ex
  • OCTEXA3/4 Cable gland in nickel-plated brass with gasket EX 3/4" NPT, armoured cable ATEX
  • OCTEX3/4 Cable gland in nickel-plated brass with gasket EX 3/4" NPT, unarmoured cable ATEX
  • OCTEXBA3/4C Barrier cable gland in nickel-plated brass 3/4" NPT, armoured cable IECEX-ATEX-EAC Ex
  • OCTEXB3/4C Barrier cable gland in nickel-plated brass 3/4" NPT, unarmoured cable IECEX-ATEX-EAC Ex
  • OCTEXA3/4C Cable gland in nickel-plated brass with gasket EX 3/4" NPT, armoured cable IECEX-ATEX-EAC Ex
  • OCTEX3/4C Cable gland with gasket EX 3/4" NPT, unarmoured cable IECEX-ATEX-EAC Ex
  • EXHS000 Sunshield 650mm for EXH series
Brackets and adaptors
  • EXBJ000 Only ball joint for EXH RAL7032 housings
  • EXWBJ000 Bracket and ball joint RAL7032 for EXH series
Spare parts
  • OSLIEX Internal slide complete with heater for EXHC and EXPTC series
  • TOP