Accessories
Accessories
for Camera Housings
SUNSHIELD
Protection against solar rays and the increase of the housing’s internal temperature. Highly recommended for outdoor installations.
HEATER
Circuit made up of a thermostatically controlled 20W or 40W heating element PTC Ton ≤ 15°C (59°F); Toff ≥ 22°C (71°F). It is available in 12Vdc/24Vac voltage or 115/230Vac voltage.
FAN ASSISTED HEATER
The fan allows for forced air circulation and homogeneous temperature inside the housing. Available for VERSO, VERSO COMPACT and HOV housings.
REINFORCED HEATING Circuit made up of a thermostatically controlled double PTC or triple fan-assisted PTC for installations where external temperatures are very rigorous. Operating temperatures: down to -40°C (-40°F), for the double heater, down to -50°C (-58°F), for the triple fan-assisted heater.For HEG and HEP housings.
CAMERA POWER SUPPLY
Camera feeding circuit, which can be installed inside the housing, available in different versions: 115/230Vac input and 24Vac/12Vdc output.
BLOWER
Blowing circuit with a thermostatically controlled cooling blower (Ton ≥ 35°C, 95°F; Toff ≤ 20°C, 68°F) and air filter. It is available in 12Vdc, 24Vac and 230Vac versions, pre-installed in the housing or as optional kit.
Protection against solar rays and the increase of the housing’s internal temperature. Highly recommended for outdoor installations.
HEATER
Circuit made up of a thermostatically controlled 20W or 40W heating element PTC Ton ≤ 15°C (59°F); Toff ≥ 22°C (71°F). It is available in 12Vdc/24Vac voltage or 115/230Vac voltage.
FAN ASSISTED HEATER
The fan allows for forced air circulation and homogeneous temperature inside the housing. Available for VERSO, VERSO COMPACT and HOV housings.
REINFORCED HEATING Circuit made up of a thermostatically controlled double PTC or triple fan-assisted PTC for installations where external temperatures are very rigorous. Operating temperatures: down to -40°C (-40°F), for the double heater, down to -50°C (-58°F), for the triple fan-assisted heater.For HEG and HEP housings.
CAMERA POWER SUPPLY
Camera feeding circuit, which can be installed inside the housing, available in different versions: 115/230Vac input and 24Vac/12Vdc output.
BLOWER
Blowing circuit with a thermostatically controlled cooling blower (Ton ≥ 35°C, 95°F; Toff ≤ 20°C, 68°F) and air filter. It is available in 12Vdc, 24Vac and 230Vac versions, pre-installed in the housing or as optional kit.
WEATHERPROOF JUNCTION BOX (OHEGBB)
External junction box, weatherproof standard IP55, allowing the housing of wiring harnesses or auxiliary cards
WIPER (HEG)
Wiper kit including the support for the washing pump injector. Available in 24Vac and 230Vac versions.
WASHER AND RESERVOIR (VIPWAS and UPTWAS series)
Glass washing kit with 5l (1.3gal) or 23l (6gal) reservoir. The pump is available in 24Vac and 230Vac. A special version of the washer and reservoir for high delivery is available for up to 30m (98.5ft) IN 230Vac only.
DTWRX WIPER AND WASHER CONTROL
Optional board for wiper and washer remote control of stand-alone housings, via RS485. Compatible only with UPTWAS pumps series. For HEG and HOV housings.
SEALING RINGS FOR CABLE MANAGEMENT BRACKET
To be used with wall cable management bracket for IP66/IP67 weatherproof protection.
ALARM TAMPER SWITCH
The alarm contact allows for checking of the eventual tampering.
External junction box, weatherproof standard IP55, allowing the housing of wiring harnesses or auxiliary cards
WIPER (HEG)
Wiper kit including the support for the washing pump injector. Available in 24Vac and 230Vac versions.
WASHER AND RESERVOIR (VIPWAS and UPTWAS series)
Glass washing kit with 5l (1.3gal) or 23l (6gal) reservoir. The pump is available in 24Vac and 230Vac. A special version of the washer and reservoir for high delivery is available for up to 30m (98.5ft) IN 230Vac only.
DTWRX WIPER AND WASHER CONTROL
Optional board for wiper and washer remote control of stand-alone housings, via RS485. Compatible only with UPTWAS pumps series. For HEG and HOV housings.
SEALING RINGS FOR CABLE MANAGEMENT BRACKET
To be used with wall cable management bracket for IP66/IP67 weatherproof protection.
ALARM TAMPER SWITCH
The alarm contact allows for checking of the eventual tampering.