Browse by products

Browse by products

DTMRX2Telemetry data receiver, with 12 functions

DESCRIPTION

The DTMRX2 is a digital receiver, controlled by a microprocessor, for remote control of a Pan & Tilt motor and a motor-driven zoom lens.

The DCJ, DCTEL and SM matrix series control units ensure complete control of all the DTMRX2 functions. It is also interfaced to a PC through RS232. Connection to the control unit can be RS232 or RS485.

KEY FEATURES

11 standard functions for the control of P&T motors and zoom lenses, 1 function for the control of one auxiliary service (dry contact)

Aux can be used for wiper operation

Various telemetry protocols available

Version 24Vac (DTMRX224)

RS232, RS485 repeater for daisy chain configuration

DOWNLOAD

TECHNICAL DATA

General
  • 12 Functions: UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX
  • 99 identification addresses, selectable by dip switches
  • Selectable communication: RS-232 and RS-485
  • Repeater RS232 or RS485 for daisy chain configuration
  • Ability of using both polarity inversion lenses and common wire lenses
  • EEPROM for storing activated functions
  • LED indicating power supplied to the unit
  • LED indicating command reception
  • LED indicating data reception
  • Supplied with instruction manual, 2 PG11 blanking caps, 4 wall mounts with relevant fastening screws
Mechanical
  • Plastic material enclosure
  • 4 PG11 cable glands
  • Dimensions: 225x154x81mm (9x6x3in)
  • Unit weight: 1kg (2.2lb)
Electrical

    DTMRX2

  • Supply voltage: 230Vac, 50/60Hz
  • Consumption: 10W
  • Maximum switching power: 100W
  • Power supplied to the positioning device: 230Vac, 50/60Hz
  • Power supplied to the lens: from 3Vdc to 14Vdc, 100 mA max
  • AUX: auxiliary dry contact 1A 230Vac or 1A 24Vac
  • Fuse: F1: F 250mA L 250V

    • DTMRX224

  • Supply voltage: 24Vac, 50/60Hz
  • Consumption: 10W
  • Maximum switching power: 100W
  • Power supplied to the positioning device: 24Vac, 50/60Hz
  • Power supplied to the lens: from 3Vdc to 14Vdc, 100 mA max
  • AUX: auxiliary dry contact 1A 24V or 1A 230Vac
  • Fuse: F1: F 2.5A L 250V
Serial communications
  • Selectable communication speed
  • Repeater RS232 or RS485 for daisy chain configuration
  • Telemetry data input RS485 on Matrix Series SM serial output for a max distance of 1200m (3937ft)
  • Telemetry data input RS485 on keyboard serial output, max distance of 1200m (3937ft)
  • Telemetry data input RS232 for PC or keyboard control for a max distance of 15m (49ft)
  • PELCO D (2400 baud)
  • VIDEOTEC (1200, 9600, 19200, 38400 baud)
  • VIDEOTEC MACRO (1200, 9600, 19200, 38400 baud)
  • PELCO is registered trademark.
  • The product may be interfaced with devices not manufactured by VIDEOTEC. It is possible that the interface protocols have changed or are in a different configuration from earlier tested units by VIDEOTEC. VIDEOTEC recommends a test prior to installation. VIDEOTEC will not be liable for any installation costs or lost revenues in the event a compatibility problem will occur.
Environment
  • For installation indoors and outdoors
  • Operating temperature: from -20°C (-4°F) up to +50°C (122°F)
Certifications
  • Electrical safety (CE): EN60065
  • Electromagnetic compatibility (CE): EN50130-4, EN55022 (Class B), FCC Part 15 (Class B)
  • IP protection degree: EN60529 (IP56)
  • EAC certification
Related products
  • SM82A Video matrix 8 inputs and 2 outputs
  • SM164B Video matrix 16 inputs and 4 outputs
  • SM328B Matrix 32 inputs and 8 outputs
  • DCTEL Matrix and telemetry control keyboard
  • DCJ Keyboard for video and telemetry control
  • PTH310 Pan&Tilt, 230Vac
  • NXPTH210 Stailess steel Pan&Tilt, 230Vac
  • PTH311 Pan&Tilt, 24Vac
  • NXPTH211 Stailess steel Pan&Tilt,, 24Vac
  • Retrofit on discontinued products: contact VIDEOTEC for further specifications.
TOP