Browse by products

Browse by products

DTRX3Telemetry data receiver, with 17 functions

DESCRIPTION

The DTRX3 is a digital receiver, controlled by a microprocessor, for remote control of a Pan & Tilt motor, motor-driven zoom lens, wiper, washer and 4 auxiliary contacts.

Connection to the control unit can be RS232 or RS485. This digital receiver can be controlled by DCJ and DCTEL keyboards or by PC via RS232 serial connection.

KEY FEATURES

11 standard functions for the control of P & T motors and zoom lenses, 6 functions for auxiliary services (2 x dry contacts, 1 x 12Vdc, 1x 24Vac, wiper and washer)

Up to 40 presets

Maintenance of configuration even in case of power loss

Various telemetry protocols available

Also available in 24Vac (DTRX324)

Operating temperature: -20°C + 50°C (-4°F up to 122°F)

TECHNICAL DATA

General
  • 17 Functions: UP, DOWN, LEFT, RIGHT, AUTO, WASHER, WIPER, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX1, AUX2, AUX3, AUX4
  • 999 selectable addresses through Dip Switches
  • Serial communication selectable: RS232 / RS485
  • Repeater RS232 or RS485 for daisy chain configuration
  • Ability of using both polarity inversion lenses and common wire lenses
  • LED indicating power supplied to the unit
  • LED indicating active function
  • EEPROM for the storage of active options
  • 16 bit microcontroller with re-programmable Flash memory
  • PRESET / SCAN / PATROL functions with an automatic recognition of the existing functions
  • Self-test installation procedure
  • Ability to memorize up to 40 PRESET functions (P&T motor and lens)
  • 4 alarm contacts set as N.O. or N.C.
  • Supplied with 2 PG11 blanking caps, 4 wall mounts with relevant fastening screws
Mechanical
  • Plastic material enclosure
  • 6 PG11cable glands
  • External dimensions: 337x237x128mm (15x9x5in)
  • Unit weight: 2.5kg (5.5lb)
Electrical

    DTRX3

  • Supply voltage: 230Vac, 50/60Hz
  • Consumption: 60W
  • Switching power: 100W max
  • Power supplied to the positioning device: 24Vac/230Vac, 50/60Hz
  • Power supplied to the wiper: 24Vac/230Vac, 50/60Hz
  • Power supplied to the washer: 230Vac, 50/60Hz
  • Camera power supply: 12Vdc, max 350mA (AUX1) and 24Vac, max 180mA (AUX2)
  • Power supplied to the lens: from 3Vdc to 12Vdc (max 100mA)
  • 2 dry contacts: 1A 230Vac, 1A 24Vac (AUX3, AUX4)
  • Fuses: 1 A F 250V, 2.5 A F 250V
  • DTRX324

  • Supply voltage: 24vac, 50/60Hz
  • Consumption: 40W
  • Switching power: 100W max
  • Power supplied to the positioning device: 24Vac, 50/60Hz
  • Power supplied to the wiper: 24Vac, 50/60Hz
  • Power supplied to the washer: 24Vac, 50/60Hz
  • Camera power supply: 12Vdc, max 350mA (AUX1) and 24Vac, max 180mA (AUX2)
  • Power supplied to the lens: from 3Vdc to 12Vdc (max 100mA)
  • 2 dry contacts: 1A 230Vac, 1A 24Vac (AUX3, AUX4)
  • Fuses: F5: 6.3 A F 250V
Serial communications
  • Selectable communication speed
  • Repeater RS232 or RS485 for daisy chain configuration
  • Telemetry data input on coax cable RG59 or equivalent with DTCOAX optional board for a max distance 350m (1148ft) from Matrix Series SM
  • Telemetry data input RS485 on Matrix Series SM serial output for a max distance of 1200m (3937ft)
  • Telemetry data input RS485 on keyboards serial output for a max distance of 1200m (3937ft)
  • Telemetry data input RS232 for PC or keyboard control for a max distance of 15m (49ft)
  • Protocols:
  • VIDEOTEC (300, 1200, 9600, 19200 baud)
  • PELCO D (2400, 4800, 9600, 19200 baud)
  • VIDEOTEC MACRO (1200, 9600, 19200, 38400 baud)
  • PELCO is registered trademark.
  • The product may be interfaced with devices not manufactured by VIDEOTEC. It is possible that the interface protocols have changed or are in a different configuration from earlier tested units by VIDEOTEC. VIDEOTEC recommends a test prior to installation. VIDEOTEC will not be liable for any installation costs or lost revenues in the event a compatibility problem will occur.
Environment
  • For installation indoors and outdoors
  • Operating temperature: from -20°C (-4°F) up to +50°C (122°F)
Certifications
  • Electrical safety (CE): EN60065
  • Electromagnetic compatibility (CE): EN50130-4, EN55022 (Class B), EN61000-6-3
  • IP protection degree: EN60529 (IP56)
  • EAC certification
Related products
  • SM82A Video matrix 8 inputs and 2 outputs
  • SM164B Video matrix 16 inputs and 4 outputs
  • SM328B Matrix 32 inputs and 8 outputs
  • DCTEL Matrix and telemetry control keyboard
  • DCJ Keyboard for video and telemetry control
  • PTH310P Pan&Tilt with preset, 230Vac
  • NXPTH210 Stailess steel Pan&Tilt, 230Vac
  • PTH311P Pan&Tilt with preset, 24Vac
  • NXPTH211 Stailess steel Pan&Tilt,, 24Vac
  • Retrofit on discontinued products: contact VIDEOTEC for further specifications.
TOP