Browse by products

Browse by products

EXPTEx-proof integrated P&T motors with camera housing

Config link




The robust, explosion-proof EXPT pan & tilt range has been designed for use in areas where there is a risk of explosion. They have attained Ex d certification for Zones 1 and 2 (Group IIC for gas) and Ex tb for Zones 21 and 22 for dust. They won't break under stress and are resistant to corrosive particles in the surrounding atmosphere, cleaning agents, saline mist and extremely low temperatures.


Designed to meet the strictest international standards and to operate in hazardous areas

Solid, non corrosive die-cast aluminium construction

Housing heater and preset standard supplied

7.5m (23ft) prewired multipolar armoured cable

Ambient temperature:   -20°C / +50°C (-4°F / 122°F)   or   -40°C/+50°C (-40°C/+122°F) with reinforced heater


  • Non-corrosive die-cast aluminium (anticorodal)
  • Epoxy powder painted with orange peel effect, RAL7032
  • Ambient temperature:   -20°C / +50°C (-4°F / 122°F)   or   -40°C/+50°C (-40°C/+122°F) with reinforced heater
  • Not to be installed upside down
  • Horizontal rotation:   0-360°
  • Horizontal speed   (fixed):   6°/s
  • Pan Torque:   2.5kgm
  • Vertical plane movement:   ±90°
  • Tilt speed   (fixed):   2.4°/s
  • Vertical torque:   6kgm
  • Horizontal limit switch adjustable only for the Autopan function
  • 1 cable gland Ex d 3/4” NPT IP66 ATEX for armoured cables in the base of the P&T according the housing marking
  • Pre-wired multipolar armored cable normally supplied with 7.5m (25ft) length: diameter 21.4mm (0.85in): 21 poles 0.5mm², 6 poles 1.5mm², 2 RG179, 75 Ohm
  • Minimum bending radius:10x   cable diameter
  • External dimensions:
  • EXPTC 427.5x571.4x560mm (16.8x322.5x22in)
  • Internal dimensions:
  • EXPTC Ø 180x380mm (7x14.9in)
  • Internal usable area:
  • EXPTC 100x100x280mm (3.9x3.9x11in)
  • Unit weight:
  • EXPTC 56.5kg / 124.5lb
  • Glass window extra clear:
  • EXPTC Ø 114mm (4.5in)
  • Power supply:   IN   24Vac,   50/60Hz
  • Horizontal and vertical motor consumption: 50W max
  • Consumption:   P&T static,   heating switched off:   0 W
  • Standard vertical and horizontal preset potentiometers
  • Reinforced heater,   Ton 10°C±4°C (50°F±7°F),   Toff 25°C±3°C (77°F±5°F):
  • 3 resistors in the housing
  • 2 resistors in the P&T (one for each motor)
  • Consumption:   100W   max
  • Devices to install inside the housing:
  • Camera equipped with lens with max total power of 20W
  • Power supply max 24Vac (only for analog camera)
  • Usable volume for camera/lens:   2800cm³
  • Minimum distance between the walls of the housing and the camera/lens: 12mm
  • For installation indoors and outdoors
  • Operating temperature with heating:   -20°C / +50°C (-4°F / 122°F)
  • Operating temperature with reinforced heater:   -40°C / +50°C (-40°F/+122°F)
  • Always refer to the temperature in the marking.
  • Relative humidity:   from   10%   up to   95%   (no condensation)
  • ATEX   (EN 60079-0:2012 +A11:2013, EN 60079-1:2014, EN 60079-31:2014):
  • Ex   II 2G Ex d IIC T6 Gb

    Ex   II 2D Ex t IIIC T85°C Db IP66

  • IECEx   (IEC 60079-0:2011, IEC 60079-1:2014, IEC 60079-31:2013):
  • Ex d IIC T6 Gb

    Ex t IIIC T85°C Db IP66

  • EAC EX:
  • Ex d IIC T6 Gb

    Ex tb IIIC T85 Db IP66

  • KCs 16-KA4BO-0059 - 16-KA4BO-0056
  • Ex d IIC T6

    Ex tb IIIC T85°C

  • EXPTS000 Sunshield 580mm (22.8in) for EXPT series
Brackets and adaptors
  • EXPTWB000 Bracket RAL7032 for EXPT series
Related products
  • EXDTRX3 Data telemetry receiver 17 functions, 230Vac
  • EXDTRX324 Data telemetry receiver 17 functions, 24Vac
Spare parts
  • OEXMYLAR Mylar film replacement kit, 18m (59ft), 350 steps

    Available models

    Model Number

    Housing heater 24Vac

    Pre-wired multipolar cable



    Glass protection device

    Ambient temperature


    -20°C / +50°C (-4°F / 122°F)


    -40°C / +50°C (-40°F/+122°F)