Browse by products

Browse by products

EXPTEx-proof integrated P&T motors with camera housing

Config link




The EXPT Pan & Tilt is characterised by the absence of external rotating cables, for easy installation and safe operation of the device. The EXPT is supplied with presets and be equipped on request with sunshield, auto-pan and a patented glass protection device.


Designed to meet the strictest international standards and to operate in hazardous areas

Solid, non corrosive die-cast aluminium construction

Housing heater and preset standard supplied

7.5m (23ft) prewired multipolar armoured cable

Version with glass protection device, EXPTD

Ambient temperature:ᅠ ᅠ-20°C / +50°C (-4°F / 122°F)ᅠ ᅠorᅠ ᅠ-40°C/+50°C (-40°C/+122°F) with reinforced heater


  • Non-corrosive die-cast aluminium (anticorodal)
  • Epoxy powder painted with orange peel effect, RAL7032
  • Ambient temperature:ᅠ ᅠ-20°C / +50°C (-4°F / 122°F)ᅠ ᅠorᅠ ᅠ-40°C/+50°C (-40°C/+122°F) with reinforced heater
  • Not to be installed upside down
  • Horizontal rotation:ᅠ ᅠ0-360°
  • Horizontal speedᅠ ᅠ(fixed):ᅠ ᅠ6°/s
  • Pan Torque:ᅠ ᅠ2.5kgm
  • Vertical plane movement:ᅠ ᅠ±90°
  • Tilt speedᅠ ᅠ(fixed):ᅠ ᅠ2.4°/s
  • Vertical torque:ᅠ ᅠ6kgm
  • Horizontal limit switch adjustable only for the Autopan function
  • 1 cable gland Ex d 3/4” NPT IP66 ATEX for armoured cables in the base of the P&T according the housing marking
  • Pre-wired multipolar armored cable normally supplied with 7.5m (25ft) length: diameter 21.4mm (0.85in): 21 poles 0.5mm², 6 poles 1.5mm², 2 RG179, 75 Ohm
  • Minimum bending radius:10xᅠ ᅠcable diameter
  • External dimensions:
  • EXPTC 427.5x571.4x560mm (16.8x322.5x22in)
  • EXPTD 573.5x581x580mm (22.6x22.9x22.8in)
  • Internal dimensions:
  • EXPTC Ø 180x380mm (7x14.9in)
  • EXPTD Ø 180x460mm (7x18.1in)
  • Internal usable area:
  • EXPTC 100x100x280mm (3.9x3.9x11in)
  • EXPTD 100x100x280mm (3.9x3.9x11in)
  • Unit weight:
  • EXPTC 56.5kg / 124.5lb
  • EXPTD 62kg / 136.9lb
  • Glass window extra clear:
  • EXPTC Ø 114mm (4.5in)
  • EXPTD 70x56mm (2.7x2.2in)
  • Glass protection device:
  • Ø 250x140mm (9.8x5.5in)
  • Mylar film 80mm (3.1in) wide and 18m (59ft) length, 350 shifting steps, marks printed on the last 50cm (19in)
  • Power supply:ᅠ ᅠINᅠ ᅠ24Vac,ᅠ ᅠ50/60Hz
  • Horizontal and vertical motor consumption: 50W max
  • Consumption:ᅠ ᅠP&T static,ᅠ ᅠheating switched off:ᅠ ᅠ0 W
  • Standard vertical and horizontal preset potentiometers
  • Reinforced heater,ᅠ ᅠTon 10°C±4°C (50°F±7°F),ᅠ ᅠToff 25°C±3°C (77°F±5°F):
  • 3 resistors in the housing
  • 2 resistors in the P&T (one for each motor)
  • Consumption:ᅠ ᅠ100Wᅠ ᅠmax
  • Glass protection device:
  • 24Vac,ᅠ ᅠpower consumptionᅠ ᅠ2Wᅠ ᅠmax
  • Devices to install inside the housing:
  • Camera equipped with lens with max total power of 20W
  • Power supply max 24Vac (only for analog camera)
  • Usable volume for camera/lens:ᅠ ᅠ2800cm³
  • Minimum distance between the walls of the housing and the camera/lens: 12mm
  • For installation indoors and outdoors
  • Operating temperature with heating:ᅠ ᅠ-20°C / +50°C (-4°F / 122°F)
  • Operating temperature with reinforced heater:ᅠ ᅠ-40°C / +50°C (-40°F/+122°F)
  • Always refer to the temperature in the marking.
  • Relative humidity:ᅠ ᅠfromᅠ ᅠ10%ᅠ ᅠup toᅠ ᅠ95%ᅠ ᅠ(no condensation)
  • ATEXᅠ ᅠ(EN 60079-0:2012 +A11:2013, EN 60079-1:2014, EN 60079-31:2014):
  • Exᅠ ᅠII 2G Ex d IIC T6 Gb

    Exᅠ ᅠII 2D Ex t IIIC T85°C Db IP66

  • IECExᅠ ᅠ(IEC 60079-0:2011, IEC 60079-1:2014, IEC 60079-31:2013):
  • Ex d IIC T6 Gb

    Ex t IIIC T85°C Db IP66

  • EAC EX:
  • Ex d IIC T6 Gb

    Ex tb IIIC T85 Db IP66

  • KCs 16-KA4BO-0059 - 16-KA4BO-0056
  • Ex d IIC T6

    Ex tb IIIC T85°C

  • EXPTS000 Sunshield 580mm (22.8in) for EXPT series
  • EXPTS001 Sunshield 650mm (25.6in) for EXPTD
Brackets and adaptors
  • EXPTWB000 Bracket RAL7032 for EXPT series
Related products
  • EXDTRX3 Data telemetry receiver 17 functions, 230Vac
  • EXDTRX324 Data telemetry receiver 17 functions, 24Vac
Spare parts
  • OEXMYLAR Mylar film replacement kit, 18m (59ft), 350 steps
  • OEXDPVN Complete front flange with glass protection device for EXHD and EXPTD series, RAL7032
  • OSLIEXD Internal slide complete with heater for EXHD and EXPTD series

    Available models

    Model Number

    Housing heater 24Vac

    Pre-wired multipolar cable



    Glass protection device

    Ambient temperature


    -20°C / +50°C (-4°F / 122°F)


    -40°C / +50°C (-40°F/+122°F)


    -40°C / +50°C (-40°F/+122°F)