Browse by products

Browse by products

ULISSE EVO range, Accessories

COMB Communication box in polycarbonate

Designed to work exclusively with Videotec products and accessories

1 SFP port, 3 RJ45 ports, 2 bypass for analog video signals

Extended/Industrial range electronics

FM1010 EMC filter for Marine certification

  • Electrical data: from 0 up to 250V DC/AC 50/60 Hz, 6A

PSINJ95CH1 PoE++ Injector (95W)

  • PoE++ Injector (95W), 1 channel, indoor installation
  • Input voltage: from 100Vac up to 240Vac

OHEP90INJO Power Injector PoE (90W)

  • Power Injector PoE (90W), 1 channel, for outdoor installations
  • Input voltage: from 100Vac up to 240Vac
  • Weatherproof standard IP66, NEMA 4X

SURGEPR Lightning surge protection device

  • Surge handling capability: 10kV, 5kA to ground in 8/20µs, 800V, 100A PoE
  • Weatherproof standard IP66, NEMA 4X

WASNX Washer pump with solenoid valve for stainless steel products

  • Enclosure made of stainless steel AISI 316L
  • Delivery: 30m (98ft) (antistatic water delivery pipe supplied, 20m (66ft))
  • Water tank capacity: 10l (2.6gal)
  • Suitable for Videotec products
  • Operating temperature: from -20°C (-4°F) up to +60°C (140°F)
  • Available voltages: 230Vac, 120Vac, 24Vac
  • IP protection degree (EN60529): IP65 (solenoid valve only, enclosure not rated)

WASPT Washer pump and 5 or 23 litre tank

  • Polyethylene tank with stainless steel cage
  • Delivery: 5m (16ft), 11m (36ft), 30m (98ft)
  • Versions with alarm for the lack of liquid in the tank (WASPT)
  • Also for third-party products
  • Operating temperature: from -10°C (14°F) up to +60°C (140°F)
  • Available voltages: 230Vac, 120Vac, 24Vac
  • IP protection degree (EN60529): IP66 (only products with 5m (16ft) or 11m (36ft) delivery head)
  • The WASPT0V23L11M00 washer pump with tank of 23l (6gal) and delivery head 11m (36ft) is certified "Lloyd's Register Marine Type Approval"

UEI LED illuminator for ULISSE EVO

  • Wavelength: 850nm, 940nm, white light
  • Automatic and remote switching on
  • No calibration required for light beam alignment with the camera
  • Automatic recognition of the type of illuminator installed